Reviews of the Best DSLR Camera Sliders
Neewer pro 4-way macro focusing slider
It has a quarter inch screw hole that is compatible with close up shooting for Samsung, Sony, Pentax, Olympus, Nikkon, Canon and any other DSLR camera that is digital. It also fits most copy and tripod stands.
1.) It is made out of Aluminium with locking knobs that ensure steady focus while in use.
2.) Rack and pinion movements are smooth. This plays a big role in ensuring fine focus adjustments.
3.) It has two 6 inches rails that allow for movement in four directions i.e forward, backward, right and left.
4.) This rail has geared drive system that increases its adjustment speed and accuracy.
5.) The macro-focusing slider helps in focusing subjects with great precision.
Neewer Aluminium alloy camera track slider
1.) It has foldable legs. This helps in making it more portable and reducing set up time.
2.) The leg height can be adjusted from 8.5 centimetres to 10 centimetres.
3.) It has 4 u shaped ball bearings that are located under the slider. These ball bearings make sure that minimum abrasion and smooth motion on the Aluminium alloy tubes (aluminium).
4.) The rail has 4 threaded holes on the fixed plate to allow you fix a tripod for horizontal and 45 degrees shots. 2 threaded holes at the end sides of the track to allow you fix tripod for vertical shoots.
5.) It has a bubble level to show the slanting degree.
6.)Its joint interface is gear-shaped and also has locking knobs that improve position locking.
Neewer Aluminium alloy 24 inches/60 centimetres handheld stabilizer.
This rail is handheld and does not need dolly’s or tripods. The camera platform has both x and y-axis adjustments.This rail can carry up to 3 kilograms. It has a 1/4 and 3/8 inch screw quick shoe plate that is able to hold sony, canon, Nikkon and any other DSLR camera.
1.) This rail can be increased from 15.2 inches to 24 inches so as to adjust it to the camera’s weight.
2.) It has low friction joints and high precision bearings. This allows for low and high angle shooting.
3.) It is made out of aluminium and also has a black powder coating.
4.) It has a bi-directional base plate that aids in fine adjustment and allows it to be adjusted freely in any direction.
Neewer 23.6 Aluminium alloy camera track slider
1.) It has 4 u shaped ball bearings that are located under the slider. These ball bearings make sure that minimum abrasion and smooth motion of the Aluminium alloy tubes (aluminium).
2.) Its joint interface is gear-shaped and also has locking knobs that improve position locking.
3.) It has a bubble level to show the slanting degree.
4.) It has foldable legs. This helps in making it more portable and reducing set up time.
5.) The leg height can be adjusted from 8.5 centimetres to 10 centimetres.
The main difference between this rail and Neewer Aluminium alloy camera track slider is the track length.
Motorized camera slider dolly track
This track is also made of Aluminium alloy and is able to perform 120 degrees wide angle shoots.
1.) The slider is motorized and is also easy to operate.
2.) The slider is compatible with many brands including but not limited to Canon, Nikkon, Sony, Pentax.
3.) It is smooth and stable. This is made possible by the aluminium alloy slider.
4.)The slider can be mounted at different angles of the tripod. It has multiple 3/8 and 1/4 screw ports at its bottom.